# Smart Template FND Generic texts
# 

#XMSG: Message box text for deleted draft which has been edited (and does have active version)
ST_GENERIC_DRAFT_WITH_ACTIVE_DOCUMENT_DELETED=Changes discarded.

#XMSG: Message box text for deleted draft which has been just created (and does not have active version)
ST_GENERIC_DRAFT_WITHOUT_ACTIVE_DOCUMENT_DELETED=Draft discarded.

#XLNK: text shown on hyperlink --> message page
ST_GENERIC_RETURN_TO_MAIN=Return to the application

#XTIT: Title for navigation not found --> message page
ST_GENERIC_UNKNOWN_NAVIGATION_TARGET=Target was not found.

#XTXT: text for Error while loading data --> message page
ST_GENERIC_ERROR_LOAD_DATA_TEXT=The requested data was not found.

# YMSG,70: message displayed if no item was selected
ST_GENERIC_NO_ITEM_SELECTED=Select an item.

# YMSG,70: message displayed if more than one item was selected
ST_GENERIC_MULTIPLE_ITEMS_SELECTED=Select one item only.

# XMSG,150
ST_DATA_LOSS_TECHNICAL_ERROR_DISCARD=The changes could not be applied due to a technical issue. Do you want to discard changes and return to the previous page?

# XMSG,150
ST_DATA_LOSS_TECHNICAL_ERROR_GENERAL=The changes could not be applied due to a technical issue.

#XTOL,30
BACK=Back

# XBUT,30
CANCEL=Cancel

# XTXT,20: used for Popup Titles and Message Page title
ST_ERROR=Error

# XMSG,50
ST_CHANGES_APPLIED=Your changes have been applied.

# XMSG,20
DATA_LOSS_MESSAGE=Your entries will be lost if you leave this page.

# XMSG,20
DATA_LOSS_GENERAL_MESSAGE=Your entries will be lost if you continue.


# XBUT,30
PROCEED=Continue

# XBUT,30
DATA_LOSS_LEAVE_BTN=Leave Page

# XBUT,30
DATA_LOSS_DISCARD_CHANGES=Discard Changes

#XFLD: this text will be used to add additional information to the draft type in the list report for locked objects or objects with unsaved changes it will read like "Unsaved Changes by User" the "Unsaved Changes" part is provided by the control itself  
ST_DRAFT_OWNER=by {0}

#XFLD: this text will be used to add additional information to the draft type in the list report for locked objects or objects with unsaved changes it will read like "Unsaved Changes by another user" the "Unsaved Changes" part is provided by the control itself  
ST_DRAFT_ANOTHER_USER=by another user

#XMSG
DATA_PASTE_ERROR_MESSAGE=Pasting not possible. {0} items contain invalid data. 

#XMSG
DATA_PASTE_ERROR_CORRECTION_MESSAGE=Please correct the values mentioned below in your source file.

#XMSG
DATA_PASTE_ERROR_CORRECTION_NOTE=(Note\: Row/column refers to the position in the dataset you copied.)

#XMSG
DATA_PASTE_UNSUPPORTED_FORMAT_MESSAGE=Pasting is not available for this table.

#XMSG
DATA_PASTE_ACTION_MESSAGE=To paste in this browser, use the keyboard shortcut Ctrl+V (for Windows) or Cmd+V (for Mac).

#XBUT
PASTE=Paste

#------------Delete Confirmation popup reuse texts---------------------------

#XTIT, 20: Delete Confirmation dialog Error title
ST_GENERIC_ERROR_TITLE=Error

#XTIT, 100: Delete Confirmation dialog Delete title
ST_GENERIC_DELETE_TITLE=Delete

#XTIT, 100: Delete Confirmation dialog Delete title
ST_GENERIC_DELETE_TITLE_WITH_COUNT=Delete ({0})

#YMSG, 30: Delete success message 
ST_GENERIC_DELETE_SUCCESS=The selected object has been deleted.

#----------------------------------------------------------------------------
#------------Action Confirmation popup texts---------------------------

#XTIT, 10: Action Confirmation dialog Warning title
ST_GENERIC_LIST_TITLE=Items

#XMSG, 20:Warning Text
ST_GENERIC_WARNING_TEXT={0} of the selected items will not be processed.

#XBUT: Action confirmation dialog Continue Anyway button
ST_GENERIC_DIALOG_CONTINUE_BUT=Continue anyway

#XBUT: Action confirmation dialog Continue Anyway button
ST_GENERIC_DIALOG_CLOSE_BUT=Close
#------------Progress Indicator Line Item texts-----------------

# XFLD: Display value for the Progress Indicator when the UoM is %,  i.e.: 30%
PROGRESS_INDICATOR_DISPLAY_VALUE_UOM_IS_PERCENT={0} %

# XFLD: Display value for the Progress Indicator when the UoM is not provided, i.e.: 3 of 10
PROGRESS_INDICATOR_DISPLAY_VALUE_NO_UOM={0} of {1}

# XFLD: Display value for the Progress Indicator when the UoM is not %, i.e.: 1 of 3 GB
PROGRESS_INDICATOR_DISPLAY_VALUE_UOM_IS_NOT_PERCENT={0} of {1} {2}

# XFLD: Display value for the Progress Indicator when the UoM is not % and the target value is not provided i.e.: 1 GB
PROGRESS_INDICATOR_DISPLAY_VALUE_UOM_IS_NOT_PERCENT_NO_TARGET_VALUE={0} {1}

#----------------------------------------------------------------------------

#------------Rating Indicator texts-----------------

# XFLD: Default display value for the Rating Indicator's SubTitle text ("rating")
RATING_INDICATOR_SUBTITLE_LABEL=rating

# XFLD: Default plural display value for the Rating Indicator's SubTitle text ("ratings")
RATING_INDICATOR_SUBTITLE_LABEL_PLURAL=ratings

# XFLD: Display value for the Rating Indicator's SubTitle (e.g. 7 ratings)
RATING_INDICATOR_SUBTITLE={0} {1}

# XFLD: Display value for the Rating Indicator footer (e.g. 2 out of 5)
RATING_INDICATOR_FOOTER={0} out of {1}

# XFLD: Display value for the Rating Indicator's aggregate count (e.g. (8))
# {0}=Digit
RATING_INDICATOR_AGGREGATE_COUNT=({0})

#----------------------------------------------------------------------------

#----------Error Handling Messages-------------------------------------------

#YMSG, 30: User not authenticated message (HTTP status code: 400)
ST_GENERIC_BAD_REQUEST=No data found.

#YMSG, 50: User not authenticated message (HTTP status code: 401)
ST_GENERIC_ERROR_AUTHENTICATED_FAILED=Authentication failed.

#YMSG, 100: User not authenticated message description (HTTP status code: 401)
ST_GENERIC_ERROR_AUTHENTICATED_FAILED_DESC=The credentials you used to sign in are invalid.

#YMSG, 30: User not authorized message (HTTP status code: 403)
ST_GENERIC_ERROR_NOT_AUTORIZED=No authorization.

#YMSG, 100: User not authorized message description (HTTP status code: 401)
ST_GENERIC_ERROR_NOT_AUTORIZED_DESC=You don't have authorization to view this data.

#YMSG, 30: System is currently unavailable generic text (HTTP status codes: 500, 501, 502, 503, 504 505)
ST_GENERIC_ERROR_SYSTEM_UNAVAILABLE=Unable to load the data.

#YMSG, 200: System is currently unavailable possible reasons (HTTP status codes: 500, 501, 502, 503, 504 505)
ST_GENERIC_ERROR_SYSTEM_UNAVAILABLE_DESC=This can happen if you are not connected to the Internet, or if an underlying system or component is not available.

#YMSG, 50: System is currently unavailable while performing an action (HTTP status codes: 500, 501, 502, 503, 504 505)
ST_GENERIC_ERROR_SYSTEM_UNAVAILABLE_FOR_ACTION=Unable to perform this action.

#YMSG, 100: User not authorized for action message (HTTP status code: 403)
ST_GENERIC_ERROR_NOT_AUTORIZED_ACTION=You don't have authorization for this action.

#YMSG, 100: User not authorized for delete message (HTTP status code: 403)
ST_GENERIC_ERROR_NOT_AUTORIZED_DELETE=You don't have authorization to delete.

#YMSG, 100: User not authorized for delete message (HTTP status code: 403)
ST_GENERIC_ERROR_NOT_AUTORIZED_EDIT=You don't have edit authorization.

#YMSG, 100: User not authenticated action message (HTTP status code: 400)
ST_GENERIC_BAD_REQUEST_ACTION=This action cannot be performed for the selected object.

#YMSG, 100: User not authenticated action message  (HTTP status code: 400)
ST_GENERIC_BAD_REQUEST_DELETE=The selected object can't be deleted.

#YMSG, 100: User not authenticated action message (HTTP status code: 400)
ST_GENERIC_BAD_REQUEST_EDIT=The selected object can't be edited.

#YMSG, 100: The application is unable to load the object. This is displayed in a MessageBox along with a show details button that displays the ST_GENERIC_ERROR_SYSTEM_UNAVAILABLE_DESC message. 
ST_GENERIC_ERROR_UNABLE_TO_LOAD_OBJECT=Unable to load the object.

#YMSG, 100: The user is not authorized to view the object. HTTP status code: 401
ST_GENERIC_ERROR_NOT_AUTHORIZED_TO_VIEW_OBJECT=You don't have authorization to view this object.

#YMSG, 100: The server responds that the object can't be found. This is displayed in a MessageBox along with a show details button that displays the ST_GENERIC_ERROR_OBJECT_NOT_FOUND_DETAILS text when the button is clicked on. HTTP status code: 404
ST_GENERIC_ERROR_OBJECT_NOT_FOUND=Object not found.

#YMSG, 100: Shown when the show details button in the MessageBox that also displays the ST_GENERIC_ERROR_OBJECT_NOT_FOUND text is clicked. HTTP status code: 404
ST_GENERIC_ERROR_OBJECT_NOT_FOUND_DETAILS=The object you selected is not available in your back-end system. This can be caused by a configuration issue or an application inconsistency.

#YMSG, 100: General error text for problems with navigation
ST_GENERIC_ERROR_IN_NAVIGATION=Navigation does not work as expected.

#YMSG, 100: Shown as detail information for ST_GENERIC_ERROR_IN_NAVIGATION
ST_GENERIC_ERROR_IN_NAVIGATION_PROPERTY_MISSING=Enter a navigation property in annotation {0}.

#YMSG, 100: Shown as detail information for ST_GENERIC_ERROR_IN_NAVIGATION
ST_GENERIC_ERROR_NAVIGATION_PROPERTY_NOT_CORRECT=The navigation property {0} in annotation {1} is incorrect.

#----------------------------------------------------------------------------
#--- Texts that are relevant for Apps that use FlexibleColumnLayout and apply to object page of the root object and first level items

#XBUT: Text for button that changes from two or three column layout to fullscreen
ST_GENERIC_FCL_FULLSCREEN=Full Screen

#XBUT: Text for button that changes from fullscreen to two or three column layout
ST_GENERIC_FCL_EXIT_FULLSCREEN=Exit Full Screen

#XBUT: Text for button that closes the last column in flexible column layout
ST_GENERIC_FCL_CLOSE_COLUMN=Close


#---Final block: texts to be redefined by the application ----------------------------------------------

#--- a) Texts that are only relevant for the object page of the root object

#YMSG, 100: Message box text for draft locked by other user. Parameter: {1}= user name. "object" to be redefined.
ST_GENERIC_DRAFT_LOCKED_BY_USER=Another user edited this object without saving the changes\: \n{1} \nIf you take over, any changes will be lost.

#--- b) Texts that are only relevant for the list report

#YMSG, 100: Unsaved Changes check box text. "object" to be redefined.
ST_GENERIC_UNSAVED_CHANGES_CHECKBOX=Also delete objects with unsaved changes.

#YMSG, 100: Delete selected items text. "objects" to be redefined.
ST_GENERIC_DELETE_SELECTED_PLURAL=Delete the selected objects?

#YMSG, 100: Delete unsaved changes items text. Parameter: {1}= user name. "object" to be redefined.
ST_GENERIC_DELETE_UNSAVED_CHANGES=Another user edited this object without saving the changes\: \n{1} \n\nDelete anyway?

#YMSG, 100: Delete unsaved changes items text. "objects" to be redefined.
ST_GENERIC_DELETE_UNSAVED_CHANGES_PLURAL=Other users have edited the selected objects without saving the changes. \n\nDelete them anyway?

#YMSG, 100: Delete locked item text. Parameter: {1}= user name. "object" to be redefined.
ST_GENERIC_DELETE_LOCKED=This object cannot be deleted. It is currently locked by {1}.

#YMSG, 200: Delete locked items text. "objects" to be redefined.
ST_GENERIC_DELETE_LOCKED_PLURAL=The selected objects are currently locked by other users and cannot be deleted.

#YMSG, 100: Delete undeletable items text: {0}=digit, {1}=digit
ST_GENERIC_DELETE_UNDELETABLE={0} of {1} objects cannot be deleted.

#YMSG, 100: Currently locked items text. Parameter: {0}= items count. "objects" to be redefined.
ST_GENERIC_CURRENTLY_LOCKED=1 of {0} objects is currently locked.

#YMSG, 100: Currently locked items text. Parameters: {0}= locked items count, {1}= items count."objects" to be redefined.
ST_GENERIC_CURRENTLY_LOCKED_PLURAL={0} of {1} objects are currently locked by other users and cannot be deleted.

#YMSG, 100: Delete the remaining item text. "object" to be redefined.
ST_GENERIC_DELETE_REMAINING=Do you still want to delete the remaining object?

#YMSG, 100: Delete the remaining items text. "objects" to be redefined.
ST_GENERIC_DELETE_REMAINING_PLURAL=Do you still want to delete the remaining {0} objects?

#YMSG, 100: Delete the remaining item with unsaved changes text. "object" to be redefined.
ST_GENERIC_DELETE_REMAINING_UNSAVED_CHANGES=The remaining object has unsaved changes. \n\nDo you still want to delete it?

#YMSG, 100: Delete the remaining items with unsaved changes text. "objects" to be redefined.
ST_GENERIC_DELETE_REMAINING_UNSAVED_CHANGES_PLURAL=The remaining objects have unsaved changes by other users. \n\nDo you still want to delete them?

#YMSG, 30: Delete success message. "objects" to be redefined.
ST_GENERIC_DELETE_SUCCESS_PLURAL=The selected objects have been deleted.

#YMSG, 30: Delete error message. "objects" to be redefined. 
ST_GENERIC_DELETE_ERROR=The selected object cannot be deleted.

#YMSG, 30: Delete error message. "objects" to be redefined. 
ST_GENERIC_DELETE_ERROR_PLURAL=The selected objects cannot be deleted.

#YMSG, 30: Delete success message. Parameter: {0}= deleted item as count (1). "objects" to be redefined. 
ST_GENERIC_DELETE_SUCCESS_WITH_COUNT={0} object has been deleted. 

#YMSG, 30: Delete success message. Parameter: {0}= deleted items count. "objects" to be redefined. 
ST_GENERIC_DELETE_SUCCESS_PLURAL_WITH_COUNT={0} objects have been deleted.

#YMSG, 30: Delete error message. Parameter: {0}= non-deleted item as count (1)."object" to be redefined.
ST_GENERIC_DELETE_ERROR_WITH_COUNT={0} object cannot be deleted.

#YMSG, 30: Delete error message. Parameter: {0}= non-deleted items as count."objects" to be redefined. 
ST_GENERIC_DELETE_ERROR_PLURAL_WITH_COUNT={0} objects cannot be deleted.

#--- c) Texts that are relevant for all object pages (root object as well as sub-item detail pages), plus the list report

#YMSG, 100: Delete selected item text. "object" to be redefined. Parameter: {0}=Context of the item being deleted. Context picked up from UI.HeaderInfo -> Title
ST_GENERIC_DELETE_SELECTED=Delete object?

# XBUT,50: used in a message box after pressing the delete button. Parameter: {1}= object title, {2}= object subtitle. "object" to be redefined.
DELETE_WITH_OBJECTINFO=Delete object {1}, {2}?

# XBUT,50: used in a message box after pressing the delete button. Parameter: {0}= object title. "object" to be redefined.
DELETE_WITH_OBJECTTITLE=Delete object {0}?

#XMSG: Message box text after successfully deleting an object or sub-item. "object" to be redefined.
ST_GENERIC_OBJECT_DELETED=Object deleted

#YMSG, 100: Delete undeletable sub items in the object page text. Parameter: {0}=digit, {1}=digit
ST_GENERIC_DELETE_UNDELETABLE_SUBITEMS={0} of {1} objects cannot be deleted.

#--- d) Texts that are relevant for the list report, and the object page of the root object

# YMSG,70: used in pop-over showing draft admin data. Parameter: {0}= user name. "object" to be redefined.
ST_GENERIC_LOCKED_OBJECT_POPOVER_TEXT=This object is being edited by {0}.

# YMSG,70: used in pop-over showing draft admin data. Parameter: {0}= user name. "object" to be redefined.
ST_GENERIC_UNSAVED_OBJECT_POPOVER_TEXT=This object has unsaved changes by {0}.

# XTIT,30: title of popover displayed when a user tries to open a locked object (in DraftAdminDataPopover.fragment.xml)
LOCKED_OBJECT_POPOVER_TITLE=Locked

# XMSG,100: used in expired lock dialog (pop-up). Parameter: {0}= user name. "object" to be redefined.
DRAFT_LOCK_EXPIRED=Another user edited this object without saving the changes\:\n\n {0} \n\n If you take over, any changes will be lost.

# XMSG, 100: used in inbound navigation with unsupported combination of parameters mode and preferredMode
PARAMETER_COMBINATION_NOT_SUPPORTED=Parameter combination not supported\:\n Mode\: {0}\n preferredMode\: {1}

#YMSG : Navigation error message description (HTTP status code: 401)
ST_NAV_ERROR_NOT_AUTHORIZED_DESC=Navigation to this application is not supported.

#YMSG : ObjectPage App-internal linking between entities - Navigation Property could not be determined
ST_NAV_ERROR_NAV_PROPERTY_NOT_DETERMINED=Cannot determine navigation property.

#YMSG : ObjectPage App-internal linking between entities - Navigation Property could not be determined
ST_NAV_ERROR_NAV_PROPERTY_NOT_EXISTING=Navigation property {0} does not exist.

#YMSG : ObjectPage App -internal linking between entities - TargetEntitySet is missing
ST_NAV_ERROR_TARGET_ENTITYSET_IS_MISSING=Target entity set {0} is missing.

#YMSG : ObjectPage App -internal linking between entities - not usable in combination with FCL
ST_NAV_ERROR_NO_COMBINATION_WITH_FCL=Internal application linking between entities cannot be used in combination with Flexible Column Layout.

#YMSG : ObjectPage Self-Linking - Model.read not successful
ST_NAV_ERROR_MODEL_READ_FAILED=Model read failed.

#YMSG: Default title for unnamed objects
NEW_OBJECT=<Unnamed Object>

#---End of final block: texts to be redefined by the application ----------------------------------------
